Use material handling equipment to move products, equipment, and materials while following all regulatory and company safety standards, policies, and procedures.

Key Duties:

• Case picking, put away, bulk pick
• Meet productivity rates set by facility
• Required use of all MHE such as pallet jacks, stand up forklift (high and low lifts), and walkie riders
• Pick palletized units out of rack locations above floor height and set up for outbound shipment
• Choose and record materials, weight, counts, and condition of food items via Radio Frequency (RF) system
• Complete daily forklift maintenance/check sheet
• Monitor battery charge, maintain, and clean batteries, and leave material handling equipment at the proper charging station
• Load and unload trailers

Requirements:

• Prior stand up forklift experience required (must have driven a stand up in the last 3 years and have at least 2 years of exp.)
• Must be able to work in freezing temperatures for entirety of shift – Working in (-10 below zero) for 8-10 hour shift
• Must be able to lift 50lbs without assistance
• Ability to work in a physically demanding, fast paced environment (will be on feet for entire shift)
• Basic math and attention to detail skills
• Must speak, read, and write fluently in English
• Must have composite toe mid top or high top boots

• Operate walkie rider and electric pallet jacks
• Perform pre-use inspection on pallet jack equipment
• Use RF scanners to scan all product
• Mark materials with identifying information
• Open boxes and other containers when necessary
• Pick products and make sure it shows the correct selection of lot numbers/product codes
• Record amount of material using site specific equipment to update inventory
• Arrange stock parts in specific order for assembly
• Communicate damaged products to inventory or lead/supervisor

Job Requirements:

• Must be able to speak, read, write, and understand English fluently
• Must have at least 1 year of pallet jack experience (any kind)
• Walkie rider or ride along pallet jack experience preferred but not required
• Must be able to work in physical environment, stand on feet, and lift 50lbs without assistance

Must be able to work in freezer for 10 hours. Warehouse is 10 degrees below zero

MUST BE ABLE TO WORK ALONE

This position is responsible for assisting the Product Supply & Logistics Manager with all shipping and receiving

functions for Novum warehouse, including for the Toyota Portal Program and warehouse inventory control of

Novum steel structures and related components. Verifies and keeps records on incoming and outgoing shipments

and prepares items for shipment. Follows process and procedures for incoming and outgoing shipments.

Essential Duties and Principal Responsibilities

• Process inventory pick lists, assign to proper job crate and keep stock inventory organized.

• Create thorough & accurate shipping documents. Update all in DAX.

• Receive deliveries into Novum A/R system.

• Apply shipping labels to finished product and load/crate/pack per sequences or zones.

• Assist with packaging, photographing and labeling of all Novum materials for shipment.

• Inspect outgoing shipments to ensure they meet specified requirements including quantity and count.

• Utilize forklift to load and unload incoming/outgoing shipments at Novum warehouse and shop as needed.

• Package job crates for field use. Work with Field Services on tool organization and inventory.

• Package and identify material using methods and containers that prevent loss, damage or deterioration to

the extent necessary to ensure conformance to specified requirements.

• Load material using proper equipment that prevents loss, damage or deterioration to the extent necessary

to ensure conformance to specified requirements. Fork trucks and hand trucks are typical of equipment

used for material handling.

• Process aluminum work when released for fabrication.

• Forward and maintain applicable records as required.

• Coordinate truck shipments from warehouse.

• Maintain Toyota and Novum standard parts inventory.

• Oversee effective execution of Toyota account.

• Maintain communication with Toyota team to determine shipping dates.

• Process Bills of Lading and shipment lists for all Toyota shipments.

• Fills in and assists with whatever other duties, as called upon and/or as needed.

Qualifications / Requirements

• 3 + years of shipping/receiving, warehouse, and inventory control experience

• Basic email and computer skills (MS Word, Excel, Bluebeam)

• Ability to make decisions quickly and handle multiple tasks simultaneously

• Organized and highly detailed

• Must be able to work independently and within a team setting

The Maintenance Technician is responsible for the installation, maintenance, troubleshooting, and repair of manufacturing equipment and facility systems to ensure safe, reliable, and efficient plant operations. This role requires strong electrical and mechanical expertise, the ability to diagnose complex equipment issues, and the discipline to perform both reactive and preventive maintenance in a fast-paced manufacturing environment.

Key Responsibilities

Equipment & Process Support

• Diagnose and repair electrical, mechanical, pneumatic, and control system issues on production equipment
• Support automated and semi-automated equipment including CNC machines, waste collection systems, and other industrial fabrication tooling.
• Perform equipment changeovers, adjustments, and validations to support production schedules
• Partner with manufacturing, engineering, and distribution teams to resolve chronic equipment issues

Preventive & Predictive Maintenance

• Execute preventive maintenance (PM) activities per established schedules and standards
• Identify failure trends and recommend corrective or predictive maintenance actions
• Document all maintenance activities accurately in the CMMS
• Assist in the development and continuous improvement of PM programs

Electrical, Controls & Automation

• Troubleshoot motors, drives, sensors, relays, safety circuits, and basic PLC logic
• Perform lockout/tagout (LOTO) and electrical safety procedures in compliance with OSHA and NFPA standards
• Support troubleshooting of HMIs, vision systems, and basic robotics (where applicable)

Facilities & Utilities

• Maintain plant utilities including compressed air, water, HVAC, and material handling systems
• Perform basic facility repairs (lighting, doors, guards, safety devices, etc.)
• Support contractors and vendors during facility or equipment service activities

Safety, Quality & Continuous Improvement

• Maintain a strong safety mindset and proactively identify hazards or unsafe conditions
• Support root cause analysis (RCA) for downtime, scrap, and safety incidents
• Participate in continuous improvement initiatives related to uptime, reliability, and cost reduction
• Ensure equipment repairs meet quality, safety, and regulatory requirements

The Maintenance Technician is responsible for maintaining, troubleshooting, and repairing mechanical, hydraulic, pneumatic, and electrical systems in a press and wood fabrication manufacturing environment. This role ensures equipment up time and supports production efficiency through preventive and emergency maintenance.

Responsibilities:

• Perform preventive maintenance on press machines, fabrication equipment, and facility systems
• Diagnose and repair mechanical, electrical, hydraulic, and pneumatic issues
• Maintain documentation of maintenance activities and equipment history
• Assist in equipment upgrades and rebuilds
• Mechanical aptitude
• Assist in equipment upgrades and rebuilds.
• Ensure compliance with OSHA and company safety standards.
• Operate and maintain hand and power tools safely.
• Collaborate with Maintenance Manager, production and engineering teams to minimize downtime.
• Support facility maintenance, including HVAC, plumbing, lighting, and general repairs
• Use of forklift and lift trucks
• Welding and fabricating as needed
• Organization planning and project management
• Work independently or as a team to accomplish goals
• Other duties as assigned

Essential Duties and Responsibilities

1. Receives incoming freight and enters receiving information into the ERP system to maintain efficient inventory control.
2. Assists in prioritizing daily tasks, coordinating workflow, and ensuring work meets quality and procedural standards through collaboration with team members.
3. Communicates promptly with customer service regarding potential shipment delays.
4. Collaborates with managers and supervisors to ensure coordination of shipments, inventory management and quality assurance.
5. Supports the review and improvement of procedures to ensure timely, accurate, and efficient processing of shipping and receiving functions.
6. Works with department representatives to analyze shipping needs to determine the best method of shipment (packaging and transportation).
7. Maintains and updates all shipping records and ensures assigned warehouse zones are organized.
8. Performs weekly ship inventory checks for Kan-Ban (VMI) and MTO to verify quantity accuracy.
9. Escalates significant product shortages for approval prior to shipment, as required.
10. Organizes packers daily and creates packing plans for the following day.
11. Supports a well-trained and efficient team by sharing knowledge, promoting safe work practices, and helping ensure consistency in shipping processes. Acts as a positive example of professionalism, safety, and teamwork.
12. Notifies receiving locations (e.g., other facilities) daily on expected deliveries. Coordinates shuttles between company locations as required.

Performs other duties as requested. Supports other company shipping departments as needed.

Physical Demands

The physical demands outlined below reflect the requirements necessary for an employee to successfully perform this role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand and walk throughout the workday. The employee is frequently required to sit; talk or hear; and use hands to handle or operate tools, equipment, and materials. Occasional bending, stooping, or reaching above shoulder height is required.

The position involves frequent lifting, carrying, pushing, and pulling of materials and products. The employee must be able to:

• Lift and carry containers weighing up to 60 pounds from floor level to waist height and from cart to shelves at heights of 33 to 57 inches.
• Repetitively lift 10 to 50 pounds at various ranges including floor to waist and waist to waist levels.
• Carry loads of 25 to 60 pounds for distances of approximately 5 feet.
• Push and pull equipment such as pallet jacks with forces up to 100 pounds over a distance of 25 feet.

Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

May work outside in all weather conditions; mainly works indoors in warehouse settings, which are often cooler or hotter than traditional offices. The noise level is often high due to use of various equipment.

Personal protective equipment including hearing protection, safety eyewear, and safety footwear are to be always worn while performing the daily responsibilities of this position.

Responsibilities

1. Perform setups and operations on CNC Fiber Tube Lasers

2. Check material thickness for accuracy and load material into laser.

3. Perform assigned work to time standards and quality expectations.

4. Identify and solve machine alignment and cut condition problems.

5. Troubleshoot minor program errors independently.

6. Cross Train across multiple laser platforms and cells.

7. Account for time and work completed via online computer data collection system.

8. Make routine decisions and use problem solving to resolve basic manufacturing issues.

9. Report and document basic material, production, and quality control issues.

10. Maintain performance logbooks on assigned area equipment, report deficiencies to the maintenance team.

11. Participate in equipment preventative maintenance at the operator level.

12. Assist in other departments during slow periods as needed.

Other duties as assigned.

Education and Training

High school diploma or GED required. Strongly prefer high school or technical shop

class experience.

Experience

At least one year of successful performance in a shop environment. Able to set up and operator a tube laser. Previous blueprint reading and use of measuring equipment (i.e. calipers, mics, tape ect.) Previous forklift experience. Forklift certification helpful

Skills and qualifications

Must Possess:

A safety orientation
Ability to safely operate a forklift, crane, micrometer, and calipers.
Ability to visually and manually inspect materials and determine which meet Sanborn’s criteria
Ability to regularly lift 35 lbs. unassisted and heavier materials with assistance.
Ability to manually manipulate materials, to include reaching above shoulders, climbing, balancing, stooping, kneeling, crouching or crawling.
Ability to give and respond to verbal instruction while performing an activity (especially as it relates to safety.
Ability to operate machinery with hands and feet
Commitment/willingness to increase job-related knowledge and skills.
Must be able to stand and walk for extended periods of time to meet customers needs
Must be able to effectively use typical or general office equipment such as a telephone, facsimile, computer and copy machine.
Job Type

Full-time

Pay

$24.00 – $30.00 per hour

Responsibilities

• Set up, operate, and troubleshoot screw machines, ensuring optimal performance and adherence to specifications.
• Monitor machine operations, making adjustments as necessary to maintain quality and efficiency.
• Inspect finished products for dimensional accuracy and quality, utilizing precision measuring tools.
• Perform routine maintenance on machines to ensure reliability and longevity.
• Document production output, machine performance, and any quality issues, reporting findings to supervisors.
• Collaborate with team members to identify process improvements and implement best practices.

• Oversee and coordinate plant operations and activities
• Troubleshoot and resolve issues in a timely fashion
• Load and unload equipment and materials
• Provide innovative solutions to improve plant efficiency
• Conduct routine preventive maintenance on the plant
• Log and record readings for equipment and procedures

The Machine Operator will have the opportunity to flex between working with both a laser and a brake press machine. This position is responsible for bending/fabricating parts according to specifications, and plays a critical role in ensuring that our parts are created in both an efficient and timely manner.    

Next Level Staffing is currently seeking experienced and reliable CNC Machinists to join our industrial production team. You will set up and program various tools and equipment to create, modify, or repair precision parts. During production, you must monitor the machinery and conduct regular quality checks to ensure they are running properly and that the parts are being produced according to specifications. Accuracy is crucial to our production, so all candidates must have attention to detail and be extremely focused on their work.

CNC Machinist Duties and Responsibilities

• Check CNC machinery is in good working order before set up
• Set up machinery to successfully conduct the run as specified
• Conduct all programming as required
• Monitor the run throughout the cycle, checking that specifications are met
• Perform all necessary machine maintenance
• Follow safety standards at all times
• Report any safety or maintenance concerns to management immediately
• Keep all work areas clean and organized

CNC Machinist Requirements and Qualifications

• High school diploma or equivalent
• 2+ years of experience as a CNC Machinist or similar role
• Able to read and follow technical drawings and diagrammed instructions
• Must be able to pass background check and drug screening

Responsibilities:

• Assemble, address, stamp, and ship merchandise or material
• Unpack, verify, and record incoming merchandise or material
• Arrange appropriate transportation of products
• Assist customers with shipping inquiries
• Perform other administrative duties as assigned

• Oversee and coordinate plant operations and activities
• Troubleshoot and resolve issues in a timely fashion
• Load and unload equipment and materials
• Provide innovative solutions to improve plant efficiency
• Conduct routine preventive maintenance on the plant
• Log and record readings for equipment and procedures

2nd shift: Monday-Thursday; 3:00pm-1:00am (4, 10 hour shifts)

Job Description/Job Duties:

• Read job specifications from shop drawings or blueprints to determine machine adjustments and material requirements
• Sets stops or guides to specified length as indicated by scale, rule, or template
• Position work piece against stops or align layout marks with dye or blade
• Push button or depresses pedal to activate machine
• Observe machine operation to detect work piece defects or machine malfunction
• Measure work piece dimensions to determine accuracy of machine operation
• Perform minor machine maintenance such as oiling machines, dyes, or work pieces
• Set up machine and change forming dyes
• Stack, mark, pack and transport finished work pieces to appropriate area, or direct unloader to do same
• Notify Purchasing of material needed for area
• Follow good housekeeping practices in keeping work area clean
• Perform assigned duties following safe manufacturing processes and conform to shop safety rules
• Other duties may be assigned
• Ability of perform basic calculations using a calculator
• Must be able to read and use tape measure; frequently uses an overhead crane, forklift truck and combination square, job crane, wrenches, drill bit sharpener and screwdrivers
• Demonstrates values of honesty and integrity, respect for others, teamwork and collaboration
• Strong interpersonal and communication skills (both verbal and written)
• Physical requirements include regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds when turning parts over, dependent on the part being painted
• Specific vision abilities required by this job include color vision, and ability to adjust focus. Twisting, turning, grasping, reaching, kneeling, crawling, pulling, and extended periods of standing
• Employee must wear OSHA approved safety shoes, safety glasses, gloves, and hearing protection
• Employee must be willing to work as needed, as well as any shift

Please apply with an up-to-date resume, our client is reviewing resumes prior to offering an in person interview.

Schedule: Monday-Thursday; 6:30am-5:00pm, OT on Friday's as needed.

Essential Duties and Responsibilities:

• Sets up and operates a variety of woodworking machines and uses various hand tools to fabricate product from blueprints or drawing specifications
• Knowledge of hand routers, drill press, circular saw, hand drills
• Trim product by rounding, deburring, filing, chisels or wood files
• Drill product if needed according to blueprint or drawing specification
• Ability to lift a minimum of 50LBS
• General labor such as sweeping, empty garbage, general cleanliness of shop and surrounding work area
• Ability to read a tape measure and general math skills.
• Open table set-up for router out custom openings
• Basic trouble shooting skills
• (Optional) wear hearing protection on machines exceeding 90 decibels

• Each client has their own schedule and pay rates, a recruiter will discuss this information with you
• 1st and 2nd shift available
• Weekly pay
• Health, Dental and Vision Insurance -even for temporary associates!

• Inspecting or checking parts using a variety of precision measuring instruments or against fixed samples.
• Assisting with nonconforming product and root cause analysis.
• Reading and interpreting drawings, with a firm understanding of GD&T.
• Performing repetitive inspections following standardized methods and procedures.
• Supporting department functions, including meeting planning, document preparation, and coordinating activities.
• Collecting and compiling data to prepare standard reports for decision-making.

What we are looking for:
Proficiency with precision measuring instruments, including experience with CMM
(Coordinate Measuring Machines).
Familiarity with Microsoft Office Suite (Word, Excel, Outlook, PowerPoint).
Strong math skills (add, subtract, multiply, divide with whole numbers, fractions, and
decimals).
Excellent problem-solving abilities, attention to detail, and capacity to prioritize multiple
assignments under deadlines.
High School Diploma or GED required.
Even better if you have:
Experience with Microsoft Dynamics AX
SolidWorks/SolidWorks Inspection experience.
Sailing or rope handling background.
Hydraulic systems knowledge and/or hands on experience working with hydraulic systems.

The General Laborer/Machine Operator is responsible for some general labor as well as learning how to operate machinery and equipment under supervision, following instructions and safety guidelines to produce components or finished products.

Responsibilities:

• Assist machine operators in setting up and adjusting machinery according to production requirements.
• Perform routine maintenance tasks, such as cleaning, lubricating, and minor repairs on machinery, to ensure smooth operation.
• Monitor machines during operation, reporting any malfunctions or abnormalities to supervisors and assisting in troubleshooting as needed.
• Handle materials and products, including loading and unloading raw materials, operating material handling equipment, and moving finished goods to designated areas.
• Participate in assembly, packaging, and labeling of products, following standard operating procedures and quality standards.
• Inspect finished products for defects or imperfections, reporting any issues to supervisors and assisting in quality control efforts.
• Follow safety protocols and wear appropriate personal protective equipment (PPE) to prevent accidents and injuries.
• Maintain a clean and organized work environment, including workstations, production areas, and storage areas.
• Assist in other tasks as assigned by supervisors, including general labor duties such as sweeping, cleaning, and organizing materials.
• Other duties as assigned

Qualifications:

• High school diploma or equivalent; previous experience in a manufacturing or industrial environment preferred.
• Basic knowledge of machine operation principles and procedures, with a willingness to learn and be trained on specific machinery.
• Ability to follow instructions, work collaboratively with coworkers, and communicate effectively with supervisors.
• Physical stamina and strength to perform manual labor tasks, including lifting, carrying, and standing for extended periods.
• Attention to detail and commitment to producing quality work.
• Flexibility to work in different areas of the manufacturing facility and adapt to changing priorities and tasks.
• Strong work ethic, reliability, and punctuality.
• Willingness to work flexible hours, including overtime and weekends, as needed.

Physical Requirements:

• Ability to lift and move heavy objects, up to 50 pounds.
• Manual dexterity and hand-eye coordination to operate machinery and perform tasks requiring precision.
• Stamina and endurance to work in a physically demanding environment.
• Good vision and hearing to detect equipment malfunctions and respond promptly.

Hours: 2pm-10pm; Monday - Friday

• Sets up and operates Blanchard grinding machines with vertical spindle and rotating table to grind flat surfaces of metal workpieces, such as steel plate, fabrications, castings, and machine parts, usually for limitied runs, analyzing specifications and selecting segmets (tooling) according to knowledge of grinding procedures: studies blueprint to visualize grinding to be done and plans of sequence of operations.
• positions and secures workpieces on magnetic chuck, in holding fixture, or directly to machine table.
• selects grinding segments, grinding speeds, and feed rates for each operation according to knowledge of metal properties and abrasives, and mounts of segments on chuck.
• verifies dimentions of ground workpiece for conformance to specifications, using such measuring instruments as micrometers, comparators, dial indicators, gauge blocks,

Basic Qualifications:

• ability to perform close tolerance work
• able to do setups, wheel changeover and wheel dressing
• willing to work overtime
• experience with close tolerance production grinding on Blanchard grinding machines

Monday through Friday, 12-5pm, $18/hour

Comfortable on a computer and working with data entry (retain knowledge well)

Strong confidence and not afraid to speak up

Solid math skills (counting)

Strong attention to detail in a fast paced environment

Self-starter with the ability to multi-task

Must be able to properly lift up to 50lbs occasionally and be able to stand for long periods of time

Quick learner. Hours are 9 AM-2PM Monday-Friday

Responsibilities:

• Safely operate a heavy or tractor-trailer truck
• Load and unload cargo
• Properly track and document activity log
• Report any issues or incidents to dispatch
• Inspect truck before and after trip

Qualifications:

• Previous experience in truck driving or other related fields
• Commercial driver's license
• Ability to handle physical workload
• Strong work ethic

1st Shift 7a-3:30p

Temp to hire roles!!